A general rangefinder telescope has two buttons, one is the power-on measurement button, and the other is the mode button. After installing the battery, press the power button, the machine will turn on, aim at the eyepiece, there will be a cross center point in the eyepiece, aim this cross center point at the target to be measured, and then press the power button, the value will be displayed, that is, the distance to be measured.

General rangefinder telescopes can adjust the mode, such as rainy day, foggy day, bow and arrow mode, as well as meter and yard unit conversion, all of which are switched with the mode key.

Before measuring, the focal length and eyepiece interval should be adjusted so that the target can be seen clearly.

Extended information:

Other functions of rangefinder telescope:

1. Measuring azimuth Use a telescope to measure azimuth, which is done by its direction division. When measuring, the telescope should be leveled. When the two targets to be measured are within the field of view, the cross intersection or any direction division is aimed at one of the targets, and then the number of digits between the two targets is counted, which is the direction angle of the two targets.

2. Measuring the altitude angle

To measure the altitude angle with a telescope, you use its altitude scale, and the method is the same as measuring the direction angle.

Onick's new short-range L series rangefinder measures both distance and speed with an accuracy of up to 0.3 meters! It is compact and comfortable to operate, allowing the operator to continuously measure the target through the telescope observation tube, and the distance value changes continuously on the LCD display. Such intuitive, convenient and fast functions help you work more efficiently outdoors!