1. Preparation

The night vision goggles dump truck is a high-tech equipment. The following preparations need to be done before disassembly and assembly:

1. Confirm that the disassembly and assembly area is safe.

2. Check whether the night vision goggles and dump truck are in the off state.

3. Prepare the tools corresponding to the disassembly and assembly of the night vision goggles dump truck.

2. Disassembly and assembly steps

1. Disassembly of the night vision goggles

The night vision goggles are installed in the cab of the dump truck. To disassemble the night vision goggles, you need to first disconnect the power cord or battery, then remove the screws and buckles that fix the night vision goggles, and gently pull out the night vision goggles.

2. Disassembly of the dump truck

To disassemble the dump truck, you need to complete the following steps in sequence:

(1) Open the body cover and dump truck door, and drain all the oil and water in the dump truck.

(2) Disconnect the engine-related parts, such as the radiator, pipes, etc.

(3) Remove the fixing screws of the base of the dump truck cab.

(4) Gradually remove the rear shell and side panels of the dump truck from the front of the dump truck, and take out the dump truck.

3. Installing night vision goggles and dump trucks

The installation of night vision goggles and dump trucks needs to be carried out in the reverse order of disassembly.

1. Installing dump trucks

(1) Reassemble the dump truck and assemble it in the reverse order of disassembly.

(2) Connect the engine and parts related to the dump truck.

(3) Reinstall the body cover and dump truck doors.

(4) After filling the liquid, check whether all parts of the dump truck are firmly connected.

2. Installing night vision goggles

(1) Insert the night vision goggles into the cab position, uncover the fixing screws and tighten them.

(2) Connect the battery or power cord to the night vision goggles.

(3) Turn on the night vision goggles and check and calibrate them.

4. Precautions

1. During disassembly and installation, be sure to pay attention to safety and the fragility of the instrument.

2. The disassembly and installation of night vision goggles require adjustment time, and avoid operating in the dark.

3. The disassembly and installation of dump trucks need to be carried out in a flat and well-lit place, and avoid working in a narrow and dim environment.

【Conclusion】

This article introduces in detail the disassembly and assembly steps and precautions of night vision goggles and dump trucks, so that you can easily master the disassembly and assembly skills and perform maintenance on night vision goggles and dump trucks.