1. What are the measurement units of laser distance meter?

Laser distance meter uses laser to measure distance, and the measurement is automatic and very convenient. The measured distance is generally a number + the measurement unit behind it. The measurement numbers obtained by different measurement units will be different. So what are the measurement units of laser distance meter?

Commonly used handheld laser distance meter, its measurement units are mainly: mm (millimeter), cm (centimeter), m (meter), ft (foot, = 0.3048m), in (inch, = 2.54cm). Multifunctional laser distance meter can also be used to measure area and volume, its units are generally ㎡ (square meters), ft² (square feet), m³ (cubic meters), ft³ (cubic feet).

2. How to adjust the unit of infrared rangefinder

Infrared rangefinder is a commonly used laser rangefinder. Due to its fast ranging speed and high measurement accuracy, it is widely used in various measurement fields. When using infrared rangefinder, sometimes it is necessary to adjust the unit of the rangefinder according to the measurement requirements, such as switching from mm to m, so how to adjust the unit of laser rangefinder?

Generally, the commonly used handheld laser rangefinder adjusts the unit directly through the above button. Different brands of infrared rangefinders have different buttons for adjusting units. Some are "UNIT" and some are "ON/ADJUST". Find the button according to the instructions in the instruction manual, and then press and hold this button for 2-3 seconds. The infrared rangefinder will automatically switch units. This button is a cycle button. Long press it every 2-3 seconds to change a unit. Keep pressing until the unit you need to switch to, and stop pressing the button.