Welcome to Onick Optics (Wuhan) Co., LTD.,!

Which is better for low-light night vision devices: 850nm or 940nm infrared fill light?

2024-09-06 Visits:

For projects that require concealment and high requirements for animal disturbance, such as wildlife protection research projects, it is recommended to use 940nm infrared fill light, because the infrared light it emits is invisible to the human eye, has better concealment, lower loss rate, and less disturbance to animals. In addition, the penetration ability of 940nm infrared fill light is stronger than that of 850nm, and it can penetrate thicker objects, which is suitable for a wider range of application needs, such as shutter remote control, smart home, drone, infrared heater and other applications.

infrared camera,surveillance camera,Hunting camera,Thermal imaging camera

For applications that require lighting effects and durability, such as lighting of equipment such as infrared surveillance cameras and infrared night vision devices, and infrared remote controls for controlling home appliances such as televisions, air conditioners, and audio, 850nm infrared fill light is a more suitable choice. The wavelength of 850nm is between visible light and infrared light, and its lighting effect is better. It can be perceived by the human eye as a weak red light. At the same time, 850nm infrared fill light has good durability and a long service life.

infrared camera,surveillance camera,Hunting camera,Thermal imaging camera

In summary, the choice of 850nm or 940nm infrared fill light depends on the specific application scenario. If you value concealment and less impact on animals, you should choose 940nm; if you need better lighting effects and durability, 850nm is a more suitable choice.

Onika's wildlife camera uses 940nm infrared fill light.

infrared camera,surveillance camera,Hunting camera,Thermal imaging camera

Model: AM-999G

Image sensor: 12MP

APP: Support Android and Apple

Live video streaming in APP: Yes

Transmission mode: 4G transmission

Memory: SD card, up to 256GB (not included)

Lens: F=3.1; Field of view = 90°

Size: 155mm *114mm *82mm

IR filter: Fully automatic IR filter

TFT display: 2.4 inches

IR light: Black 940nm

PIR sensor viewing angle: 120 degrees

IR light: 56

PIR distance: 25 meters

Trigger speed: 0.3 seconds

Trigger interval: 1/5/10/30 seconds/minute (default 1 second)

Optional image resolution: 36MP/24MP/20MP/16MP/12MP

Continuous photos: 1/3/6/9

PIR sensitivity: Low/Medium/High/OFF

Video resolution: 4K 30fps /1080P/720P/VGA

Video duration: 5s/10s/30s/60s/90s

File format: JPEG/MP4

Transmission frequency: every time/once a day/twice a day/six times a day/12 times a day

Timer: select a time period

And Onik's low-light night vision device uses 940 nanometer infrared fill light

Model: NVG-D2

Image intensifier level: Super second generation

Magnification: 1X

Resolution: 45-57

Cathode surface type: S25

Signal-to-noise ratio (dB): 15-21

Optical sensitivity (microamperes/lumens): 450-500

Failure-free time (hours): 10,000

Field of view (degrees): 42+/-3

Observation distance (meters): 180-220

Eye distance adjustable range: 65+/-5

Eyepiece diopter adjustment range (diopter): +5/-5

Lens system: F1.2, 25mm

Optical coating: Multi-layer composite broadband ultra-vacuum ion anti-reflection film

Objective adjustment range (meter): 0.25--∞

Automatic anti-glare: high sensitivity, ultra-fast, broadband detection

Flip detection: All-solid-state non-contact automatic posture recognition

Power supply voltage (V): 2.6-4.2V

Battery type (V): 2 lithium batteries

Continuous working time (hours): 80 (without infrared) 40 (with infrared)

Working temperature range (℃): -40/+50

Relative humidity: 5%-98%

Dustproof and waterproof level: IP65

Dimensions: 115x127x69mm (excluding eye mask)

Product material: All-aerospace aluminum alloy


Leave Your Message


Leave a message